Specification of William Newton : surgical chair bed.

  • Newton, William
Date:
1856
Catalogue details

Licence: Public Domain Mark

Credit: Specification of William Newton : surgical chair bed. Source: Wellcome Collection.

    5/22 page 3
    3 Newtons Improved Surgical Chair Bed. the toothed segment H, will be moved. These pinions E are fixed to the transverse shafts G, and to the longitudinal shafts G, G. F, F, are crown wheels affixed to the shafts G, G, G, G, and are driven by the pinions E to give motion to the longitudinal shafts. Instead of these wheels other gear may 5 be substituted, as represented in Fig. 5. The longitudinal shafts G, G, are for effecting the movements of the racks I and L; and II is the toothed segment for raising the head frame D. I, ascending racks to the top of which the two lateral shafts R are affixed. Those shafts R are for distending the sacking of a bed, if required ; and by means of the racks I, L, the suspended sacking may 10 be raised or lowered, the manner of distending the sacking being shewn in Fig. 4. L, L, descending racks to lower the framework of the foot part B. M, pannel at the foot, which, when lowered, forms a step, as before said. N, upright standards in which the racks slide. 0, winch to give the rotatory movement to the transverse shafts G. P, catch or pall for stopping and fixing 15 the rack and frame in any position. Q,, lateral pannel at the upper part of the exterior frame A, with hinges to lower them at pleasure. S, standard to support the shafts G and G, G. T, the transverse mattrasses of the frames B, C, D, capable of being laid in a sloping position; elastic mattrasses made with springs are to be preferred. U, coverings of the separations of the 20 matrasses, in place of which may be substituted in case of need a thin mattrass. V, close stool mattrass and box, which may be exchanged for two full mattrasses when the sick person is not required to wear the drawers or breeches (8). * elastic springs, which adapt the channel from the drawers to the opening of the close stool pan or chamber pot. 25 Fig. 4 is a horizontal representation of the sacking distended from the lateral rods or shafts. 1, lateral shaft marked R, R, Figures 1 and 2, to which are connected the suspension slips 7. (6) the cords for drawing tight the sacking (5). 2, transverse rods fixed at their centres to the transverse rods (3), which last mentioned are for holding the sacking at the ends, 30 the sides being distended by the shafts R. For these rods may be sub¬ stituted the contrivances represented in Figs. 5 and 17. 4, counterholding bars of the rods (2), to which an additional sacking (5, 5,) is fastened by straps and hooks, if necessary. 5, the sacking held at one end by straps and hooks, and furnished at the other end with little pullies. It is intended by 35 means of the frame composed of the rods (2 & 4, Fig. 4), and 31 and 32, Fig. 17) to turn the sick persons from the right side to the left, and from the left side to the right. The auxiliary sacking 5, 5, is attached to the ordinary sacking by a longitudinal seam fixed in the centre in Fig. 4, or with eccentric joints (31 in Fig. 17) ; being thus adapted its section would be
    digitised image 1
    digitised image 2
    digitised image 3